您要查找的是不是：
- Rolled aluminium alloy sheets, aluminium foil and sheets, lacquered aluminium foil and sheets,... 分类标题：有色金属型材|铝和铝合金...
- Rolled aluminium alloy sheets; lacquered, printed, corrugated and folded aluminium foils and tapes;... 分类标题：有色金属型材和棒材|铝和铝合金...
- The welding experiment to 1. 0mm + 1.0mm LF6 aluminium alloy sheets is carried out using a clos ed loop feedback principle. 利用自行研制的三相直流冲击波式点焊实验装置;采用闭环反馈控制;对1.;0mm+1
- aluminium and aluminium alloy sheet and strip 铝及铝合金带材
- Bend Property Test of Aluminium Alloy Sheet or Plate 铝合金板材弯曲性能试验
- I hardly ever know that aluminium alloy could be as strong as steel. 我几乎从来不知道铝合金竟会和钢强度一样大。
- Keywords 5182 aluminium alloy sheets;annealing process;microstructure;drawability; 5182铝合金板材;退火工艺;组织;拉深性能;
- Correlation between uniaxial tension properties and formability of automotive aluminium alloy sheet 汽车用铝合金板拉伸性能与成形能力的相关性
- Effect of Chemical Component and Fabrication Process on Properties of Aluminium Alloy Sheet Used for Bottle Lid 化学成分和工艺因素对防盗盖板性能影响的研究
- Keywords aluminium alloy sheet;hole-flanging process;limiting flanging coefficient; 铝合金板材;圆孔翻边;极限翻边系数;
- Keywords aluminium alloy sheet;drawability;evaluation parameter;regression analysis; 铝合金板;拉深性能;评价指标;回归分析;
- 5182 aluminium alloy sheets 5182铝合金板材
- Spray deposited porous aluminum alloy sheets easily have surface and edge crack when they are directly rolled due to the porosity and metallurgical bond. 喷射沉积多孔铝合金板坯由于有孔洞且缺乏良好的冶金结合,直接轧制时易出现板坯表面裂纹及边裂。
- Aluminium alloy laminates Painted, pressed, embossed, &corrugated aluminium sheets &strips... 分类标题：铝和铝合金|有色金属型材和棒材...
- The results show that there is strong basal texture in the rolled AZ31 Magnesium alloy sheet. 结果表明，经过轧制之后的AZ31镁合金板材形成强烈的基面织构；
- Petroleum and natural gas industries - Aluminium alloy drill pipe. 石油天然气工业-铝合金钻杆。
- The large aluminium alloy casting for military usage. 军用大型铝合金铸件。
- Aluminium alloy has low specific electrical resistance. 铝合金的电阻很低。
- Rear fuselage of aluminium alloy with composite fairings. 铝合金后机身带复合材料整流罩。
- Aluminium alloy body and wheels with brass bearings. 主体和轮子为铝合金制造，黄铜轴承。
